Model |
OHC-800 |
Measuring principle |
Opt-Sonic calculation through measurement of refractive index and sound speed |
Measuring gas |
CH4 basis Paraffinic Hydrocarbon gases as represented by Natural Gas *1 |
Measuring targets |
Calorific value (Density / WOBBE index selectable) |
Measuring range *2 |
Calorific value : 25.00~50.00 MJ/㎥ (Gross, 0 degree C, 101.325kPa converted)
Density : 0.500~1.500 MJ/㎥ (Specific gravity converted) |
Measuring method |
Constant-flow-rate gas introduction using external sampling devices |
Display |
Full-dot LCD (with backlight), 3 color LED lamp |
External Output |
4-20 mA DC (isolated, source current type) maximum load resistance of 300 Ω / RS-485 communication |
FAILURE alarm |
Low flow, Sensor unit abnormality, Low light amount |
FAILURE alarm display |
Lamp (red) / Content indication on LCD |
FAILURE alarm contact *3 |
No-voltage contact 1a or 1b De-energize (Energize when alarming) or Energize (De-energize when alarming)
Contact capacity of 2 A, 30 VDC (resistance load) |
Self-diagnostic function |
FUNCTION CHECK (warm-up or maintenance mode), MAINTENANCE REQUIRED, OUT OF SPECIFICATION |
Self-diagnostic display |
FUNCTION CHECK, OUT OF SPECIFICATION : Lamp (orange) / Content indication on LCD
MAINTENANCE REQUIRED : Lamp (green) / Content indication on LCD |
Self-diagnostic contact |
FUNCTION CHECK, OUT OF SPECIFICATION : No-voltage contact 1a or 1b De-energize (Energize when alarming) or
Energize (De-energize when alarming) Contact capacity of 2 A, 30 VDC (resistance load)
MAINTENANCE REQUIRED : SSR contact, contact capacity of 20 W, 240 VAC (resistance load) |
Power supply |
100 – 240 VAC ±10%, 50/60 Hz, max. 18 VA or 24 VDC ±10%, max.
5 W (The setting can be changed to either the AC or DC) |
Ingress Protection level |
Equivalent to IP66 and IP67 |
Operation temperature |
-20~+57 degree C(TIIS)/-20~+60 degree C(ATEX/IECEx) |
Operation humidity |
95%RH or less (no condensing) |
Outer dimensions / Weight |
Approx. 286 (W) x 453 (H) x 150 (D) mm / Approx. 23 kg |
Explosion-Proof structure |
Flame-proof enclosures (Explosion-proof class: ExdⅡB+H2 T4 <TIIS>/Ⅱ2GExdⅡB+H2T4 <ATEX/IECEx>) |